Kidde KI-SB Detector Mounting Base – Standard
Key Features:
- Equipped with next generation optical smoke sensing technology
- Smoke obscuration of 0.53 to 3.94%/ft (approx. 1.7 to 12.35 %/m)
- Automatically maps devices
- Up to 250 total addresses per loop
- 2 Levels of Dirty Detector Warning
- 20 Pre-alarm settings
- 5 Sensitivity settings
- Non-volatile memory
- Electronic addressing
- Identifies dirty or defective detectors
- Automatically adjusts to day / night sensitivity
- Bicolor (green / red) LED status
- Standard, Relay, Fault Isolator, and Audible Mounting bases
- With sensor markings to provide easy testing identification
Description
Kidde’s KI-SB Detector Mounting Base – Standard is the standard base for Signature Series detectors. It connects the detector to the signaling line circuit (SLC) and provides wiring terminals for connection to a GSA-LED.
The KI-SB mounts to North American 1-gang boxes and to 3.5 inches to 4 inches octagon boxes, 1.5 inches deep. It also mounts to European BESA and 1-gang boxes with 60.3 mm fixing centers.
Technical Specifications
| Wire size | 12 to 18 AWG (1.0 to 4.0 mm²) Sizes 16 and 18 AWG are preferred |
| Base mounting | 18 lbf-in (2.0 N·m) max. |
| Terminal | 12 lbf-in (1.4 N·m) max. |
| Housing | High-impact engineering polymer, white |
| Compatible detectors | Signature Series detectors |
| Accessories | GSA-TS Four-Inch Box Trim Skirt/Ring |
| Compatible electrical boxes | North American single-gang box
Octagon box 3-1/2 in. (89 mm) by 1-1/2 in. (38 mm) deep Octagon box 4 in. (102 mm) by 1-1/2 in. (38 mm) deep European single-gang box 75 mm with 60.3 mm fixing centers BESA box with 60.3 mm fixing centers |
| Temperature | 32 to 120°F (0 to 49°C) |
| Relative humidity | 0 to 93% noncondensing |
Related products
